Pedrollo JSW 3AM Deepwell

Description

The Pedrollo JSW series is a range of self-priming jet pumps — one of the most widely recognised pump ranges in domestic and civil water supply worldwide. JSW pumps use an integrated ejector unit that creates a vacuum on the suction side, allowing the pump to draw water from depths of up to 9 metres below the pump and to handle suction lines that contain air or gas without losing prime. They are the standard specification for drawing from shallow wells, underground tanks, rivers, and any installation where the water source is below the pump.

The Pedrollo deepwell JSW series uses a two-pipe shallow well ejector system — a suction pipe drawing water from the source and a smaller return pipe feeding the ejector nozzle at depth. This two-pipe arrangement allows the pump to draw water effectively from greater depths and from wells where the water level fluctuates, extending the practical suction range beyond the standard single-pipe JSW configuration.

The JSW 3AM Deepwell at 1.5kW delivers 78m maximum head — 15m more than the JSW 3BM Deepwell — at the same 160 l/min maximum flow. This increased head capacity serves demanding installations where both significant suction from depth and substantial delivery head are required simultaneously.

The JSW 3AM Deepwell is specified for larger domestic properties and agricultural operations drawing from shallow wells at greater depth, where the water must then be delivered to significant height or over long pipe runs. At 78m head it covers most domestic and agricultural shallow well scenarios without moving to the high-head ‘H’ variants.

Two-pipe ejector configuration. Cast iron pump body with cataphoresis treatment, AISI 304 stainless steel impeller, Noryl ejector unit, AISI 431 motor shaft. IE2 motor with class F insulation, IPX4 protection, integrated thermal cutout. Max pressure 10 bar. Max suction 9m. At 1.5kW confirm your single-phase circuit is correctly rated before installation.

• Power: 1.5 kW | Voltage: 230V Single Phase | Max Flow: 160 l/min (9.6 m³/h) | Max Head: 78m | Max Suction: 9m | Configuration: 2-pipe shallow well | Variant: A medium head | Max Pressure: 10 bar | Motor: IE2, IPX4

DISPATCH & PRICING NOTICE: The price shown (R10,624.07 incl VAT) applies to orders dispatched on Tuesdays or Thursdays. Orders dispatched on Mondays, Wednesdays or Fridays are subject to a 5% surcharge — total price R11,155.27 incl VAT. Please confirm your preferred dispatch day when placing your order.