Description
The Pedrollo PKSM 60 belongs to the PKS series — Pedrollo’s self-priming peripheral pump range. The critical difference between the PKSM 60 and the standard PKM 60 is the integrated non-return check valve on the suction side. This valve retains water in the pump casing after the pump stops, allowing it to re-prime the suction line automatically on the next startup without any manual intervention.
This makes the PKSM 60 the correct choice whenever the pump is installed above the water source — drawing from a ground-level tank, a shallow well, a river intake, or any installation where the suction line may drain between pump cycles.
The PKSM 60 also handles suction lines that carry irregular flow or air-entrained liquid. Maximum suction lift is 9 metres. Construction features a corrosion-resistant pump body, stainless steel impeller, and a 230V single-phase IE2 motor with integrated thermal protection and IPX4 weatherproof rating.
• Power: 0.37 kW | Voltage: 230V Single Phase | Max Flow: 50 l/min (3.0 m³/h) | Max Head: 70m | Max Suction Lift: 9m | Self-Priming: Yes | Connection: 1″ BSP
Reviews
There are no reviews yet.